The lid carries the board name and labels for BATT A, BATT B, LOAD and the I²C port, with windows for the two status LEDs so you can see which pack is live without opening it. The battery inputs and the load output pass through cut-outs in the sides. The DIN-rail clip mounts under the base with the same four M3 × 16 screws that hold the lid.
Parts
| Part | Footprint | File |
|---|---|---|
| Base | 69 × 67 × 21.6 mm | kookabus-01-base.stl |
| Lid | 69 × 67 × 23.5 mm | kookabus-01-lid.stl |
| DIN-rail clip, optional | 66 × 64 × 9 mm | kookabus-01-din-clip.stl |
| Hardware | 4 × M3 × 16 screws. They pass through the lid and base into the clip when it is fitted. | |
Footprints are the bounding boxes of the STL files. All three parts print support-free in their supplied orientation.
Files
- All enclosure files zipDownload
- Assembly STEP, for CADDownload
- FreeCAD source FCStd, for editsDownload
Board dimensions, hole pattern and connector overhangs for a case of your own are on the mechanical section of the specifications.